The R111LH delivers powerful deep-water search with a fifteen-element array, rated to 1,829 m on the low band. Its narrow high-frequency beam resolves fish and structure in sharp detail for demanding offshore fishing from larger vessels. Read more.
The AIRMAR R111LH combines a fifteen-element low-frequency array with a narrow high-frequency beam for deep-water search and detailed examination of fish and structure. Its 2 kW dual-band CHIRP design operates across 38–75 kHz, rated to 1,829 m (6,000 ft), and 130–210 kHz, rated to 457 m (1,500 ft). This combination gives offshore fishermen substantial depth reach alongside focused high-frequency target separation.
The low-frequency beam is wider port to starboard than fore to aft, providing lateral coverage while limiting its fore-aft footprint. The 8°–4° high-frequency beam concentrates on smaller areas for defined fish targets and bottom detail. Designed for solid-fiberglass vessels from 12 m (40 ft), the R111LH installs in an included cut-to-fit tank without drilling through the hull.
This R111C-LH-NC variant provides depth only and includes an integrated 15 m cable with bare-wire ends for connection to the terminals or connector assembly specified for your compatible 2 kW CHIRP fishfinder or blackbox sonar module.
R111LH Dual-Band CHIRP Transducer Body
Urethane-housed 2 kW transducer with a fifteen-element low-frequency array and a separate high-frequency element.
Cut-to-Fit Plastic Mounting Tank
Secures the transducer inside the hull and is trimmed for correct beam orientation.
Integrated 15 m Cable
Supplied with bare-wire ends for connection to compatible sonar equipment.
Test the mounting location before bonding the tank. Select an area of solid fiberglass with sufficient space for the tank and transducer removal. Orient and trim the tank within its 22° short-side or 12° long-side cutting limits, keeping the beams directed straight down. Fill it with propylene glycol (non-toxic antifreeze/coolant) as specified by AIRMAR. Install in a cool, ventilated location away from the engine compartment, and connect the cable according to the sonar equipment’s wiring instructions.
At Sail360, we help you choose marine equipment built to perform and made to last.