The M265LM delivers powerful deep-water search and sharp fish and bottom detail at medium depths. Its Low/Medium CHIRP bands are rated to 914 m and 457 m, supporting versatile offshore fishing without drilling through solid fiberglass. Read more.
The AIRMAR M265LM combines deep-water search capability with detailed returns at medium depths. Its 1 kW dual-band CHIRP design pairs 42–65 kHz Low CHIRP, rated to 914 m (3,000 ft), with 85–135 kHz Medium CHIRP, rated to 457 m (1,500 ft). This combination suits offshore fishermen locating fish deeper in the water column and examining targets near the bottom or structure.
The 25°–16° low-frequency beam provides broader coverage, while the 16°–11° medium-frequency beam offers a more focused view. The transducer installs inside a solid-fiberglass hull in an included tank cut to match the mounting position’s deadrise. No transducer protrudes beneath the boat, making the installation practical for vessels that are regularly trailered or lifted.
This M265C-LM-MM variant provides depth only and includes an integrated 9 m cable with an AIRMAR 12-pin Mix and Match™ connector. Complete your setup with a dual-band Mix and Match™ CHIRP adapter cable for your compatible fishfinder or blackbox sonar module. Explore the adapter options below.
M265LM Dual-Band CHIRP Transducer Body
1 kW transducer with separate low- and medium-frequency elements.
Cut-to-Fit Plastic Mounting Tank
Secures the transducer inside the hull and is trimmed to match the mounting position’s deadrise.
Integrated 9 m Cable
Supplied with an AIRMAR 12-pin Mix and Match™ connector.
Complete the connection with an AIRMAR Mix and Match™ CHIRP adapter cable for dual-band operation, also available at the website. Each option listed is 1 m long, with an AIRMAR MMC 12-pin connection at the transducer end. The adapter is not included with the transducer.
Check the device compatibility filters for confirmed Furuno matches, then select the connection required by your equipment. For other brands, confirm M265LM support with the equipment manufacturer.
Wired Installations
Optional Cable Extensions
Extensions provide additional cable length and do not replace the required adapter.
Test the mounting location before bonding the tank. Cut the tank to match the hull’s deadrise and secure it over solid fiberglass, with the transducer beams directed straight down. Fill it with propylene glycol (non-toxic antifreeze/coolant) as specified by AIRMAR. Install away from the engine compartment and other hot locations. Follow AIRMAR’s installation instructions.
At Sail360, we help you choose marine equipment built to perform and made to last.